November 2026 · 5 min read · By Adam Schlichting, co-founder and lead installer
Quick answer
Usually yes: you can put heat-reducing window film on Toronto condo windows with your condo board’s written approval. In Ontario, if your windows are common elements, section 98 of the Condominium Act, 1998 requires the board to approve an owner’s change. Boards most often approve light, low-reflective films applied inside the glass, like XPEL VISION Clear View Plus, because the building looks the same from outside. It rejects 55% to 62% of solar heat and blocks 99% of UV.
Short answer: usually yes, but in a condo you should get your board’s written approval first. The good news is that the films condo boards most often approve are also the ones most people want: light, low-reflective films that go on the inside of the glass, cut the heat and glare, and leave the building looking exactly the same from the street. Here is how the rules work in Ontario, what to send your board, and which films to ask for.
Do you need permission to put film on condo windows?
Start with your condo’s declaration and rules. They decide two things: whether your windows are part of your unit or part of the common elements, and what the rules say about window coverings and the look of the building.
- If the glass is a common element (common in high-rises), Ontario’s Condominium Act, 1998 (section 98) says an owner’s change to the common elements needs the board’s approval, and the board can attach conditions, such as an agreement that you are responsible for the film.
- If the glass is part of your unit, the rules on window coverings and exterior appearance still apply, so it is still worth asking.
- Renting? Ask your landlord as well. They will usually need the board’s approval too.
Asking first protects you: an approved install will not have to come off later.
Which films condo boards usually say yes to
Boards mostly care about how the building looks from outside. A dark or mirror-like film on one unit stands out on the face of a tower, so those are the ones most often refused. A light, neutral film applied inside the glass does not change the look of the building.
That is why we usually suggest XPEL VISION Clear View Plus for condos. These are XPEL’s own numbers:
| XPEL VISION film | Light let in | Solar heat rejected | Glare cut |
|---|---|---|---|
| Clear View Plus 70 | 72% | 55% | 20% |
| Clear View Plus 55 | 58% | 57% | 34% |
| Clear View Plus 40 | 40% | 62% | 53% |
All of them block 99% of UV, which slows the fading of floors and furniture. You can see each shade in a real room with our Shade Finder.
What to send your condo board
A short, complete request gets approved faster. We put this package together for you:
- The film’s spec sheet (XPEL VISION), showing it is applied inside and is low-reflective.
- A photo or sample so the board can see the building will look the same.
- A glass check: we confirm the film suits your glass type using XPEL’s film-to-glass chart, which matters on double-pane and low-E glass.
- Our certificate of insurance ($2 million liability). If the corporation wants to be named as additional insured, just tell us.
- The install plan: date, time, elevator booking and how long it takes.
What about my window warranty?
This is the other question boards and owners ask. When XPEL VISION film is professionally installed, XPEL’s limited warranty can extend to seal failure on double-pane units, as long as you have a valid seal warranty from your window maker, and glass breakage from heat stress is covered up to $500 per window. Most XPEL VISION interior films for homes also carry XPEL’s limited lifetime warranty, and every Film Bros installation comes with our own 35-year installation warranty against bubbling, fading, yellowing and peeling.
What it costs, installed
Standard solar and heat control film is $12 to $14 per square foot installed (minimum $699.99 + HST). Premium clear XPEL VISION Clear View Plus is $18 to $22 per square foot (minimum $1,299.99 + HST). See the full window film cost guide for every film.
Frequently asked questions
Can I put window film on my condo windows in Toronto?
Usually yes, with your condo board’s approval. Check your declaration and rules first. If the windows are common elements, Ontario’s Condominium Act, 1998 requires the board to approve an owner’s change, and the board can attach conditions.
Will my condo board approve tinted windows?
Boards are most likely to approve light, low-reflective films applied inside the glass, because the building looks the same from outside. Dark or mirror-like films are the ones most often refused.
Is window film safe on double-pane condo windows?
It is when the film is matched to the glass. We check your glass type first against XPEL’s film-to-glass chart, and XPEL’s limited warranty can cover seal failure and heat-stress breakage when the film is professionally installed.
How much does heat-reducing film cost for a condo?
Solar film is $12 to $14 per square foot installed, with a $699.99 minimum plus HST. Premium clear XPEL VISION Clear View Plus is $18 to $22 per square foot, with a $1,299.99 minimum plus HST.
About the Author

Adam Schlichting
Co-Founder & Lead Installer
Certified XPEL installer working on homes, storefronts and offices across Toronto and the GTA.
Want this for your glass?
Book a free video or phone call. One recommendation, one clear price.
