Free guide

The 10-Minute Window Check: drafts, seals and heat loss

Film Bros installer working on a window

November 2026 · 7 min read · By Adam Schlichting, co-founder and lead installer

Quick answer

Four checks find most window problems in about 10 minutes: the paper test for worn weatherstripping, a look for fog between the panes, the lighter test to learn your glass type, and the freeze-spray test to spot a failing seal early. Seal the gaps first. Sound glass is ready for window film now; a failed sealed unit gets replaced (we recommend tempered glass), then filmed.

Cold spots by the window, a room that never warms up, or a draft you can feel on your hand: most of the time it isn’t the glass, it’s the gaps around it. We work on windows every day across the GTA, and these are the same quick checks we use when we first look at a window. You need about 10 minutes, a sheet of paper and, for the best check, a can of freeze spray. Whatever you find, there’s a good next step, and we’ll show you what it is.

Before you start the check

  • Pick a cool or windy day if you can.
  • Close all windows and outside doors, then turn on your bathroom fans and kitchen range hood. This gently pulls outside air in through any leaks, so drafts are easier to feel.
  • Work from inside. No ladders needed.
  • Grab painter’s tape to mark any spots where you feel a draft.

Check 1: The paper test

Close the window on a sheet of paper. If it slides out easily, the weatherstripping on that side isn’t sealing. Try it at several points around the sash.

Check 2: Fog between the panes

Look closely at double- or triple-pane glass. Condensation on the room side usually means high indoor humidity. Fog, haze or water spots BETWEEN the panes mean the sealed unit has failed. Caulk and film can’t fix that; the glass unit needs replacing. Better to know now than after you’ve spent money on something else.

Check 3: What kind of glass do you have? (the lighter test)

In a dim room, hold a lighter flame a few centimetres from the glass and look at the reflections. Double-pane glass shows four small flames. If one of them is a different colour from the others, that surface has a low-E coating. Knowing your glass type matters before choosing any window film. Keep the flame away from curtains, and never leave it unattended.

Check 4: The freeze-spray seal test (the pro trick)

This is the check we like most, because it shows a failed seal before the fog gets bad. You need a can of "freeze spray", sometimes sold as circuit chiller or component cooler, from an electronics or hardware store. Any brand works.

  1. Do it when the glass isn’t hot from direct sun.
  2. Put on gloves. Spray a short burst on one corner of the room-side pane of a double- or triple-pane window.
  3. Wipe the frost off the surface you just sprayed.
  4. Now look through it at the inner surface, the one facing the air space between the panes.
    • Frost or fog forming on that inside surface means moisture has got into the sealed unit: the seal has failed.
    • Clear glass with no frost between the panes means the seal is doing its job.

Safety: freeze spray is extremely cold. Use short bursts, keep it off your skin, use it in a ventilated room, and keep it away from any flame (do the lighter test separately).

Quick fixes you can do this weekend

  • Replace worn or flattened weatherstripping. Hardware stores sell foam, rubber and V-strip types.
  • Seal gaps between the window trim and the wall inside with paintable caulk. Outside, use an exterior-grade sealant where the frame meets the siding or brick.
  • Tighten or adjust sash locks. A lock that pulls the sash tight helps it seal.
  • Clean the tracks and weep holes on sliding windows and patio doors so they close fully.
  • For a window you won’t open all winter, a clear plastic window insulation kit is a cheap seasonal fix.
  • Close heavy curtains at night; open them on sunny days to let the sun warm the room.

What your results mean: either way, there’s a next step

Your seals passed? Great: your glass is sound, and this is the best time to protect it. Window film goes straight onto healthy glass. Our XPEL VISION All Season film cuts summer heat and helps keep winter warmth in, and solar control film blocks the UV that fades floors and furniture. Where it suits the window, we can also finish the edges with silicone to help close small gaps around the glass.

Found a failed seal? Moisture has got into the space between the panes. The window still works, but it fogs up and insulates less. Your options:

  1. Leave it for now. It’s mostly a comfort and looks issue, so you can plan ahead.
  2. Replace just the sealed glass unit. In most cases you don’t need a whole new window, only the glass unit inside the frame. We recommend asking for tempered glass: it’s stronger, and it gives you the most choice of window films afterwards.
  3. Then put film on the new glass for heat, glare, UV, privacy or security, and finish the edges with silicone where it suits the window.

One honest note: film can’t clear fog that’s already inside a failed unit, so replace the unit first and film it after.

Where window film fits

Fix the gaps first. Window film goes on the glass, so it doesn’t stop drafts coming through gaps.

Once the window seals well, film helps with what the glass itself lets through. Our XPEL VISION All Season film is designed to reduce summer heat and help keep winter warmth in, for steadier comfort all year. It goes on the glass you already have, or on new glass, so you get the comfort benefits without paying extra for heavily coated replacement windows.

Worried film will void your window warranty? When XPEL VISION film is professionally installed, XPEL’s limited warranty can extend to seal failure on double-pane units, as long as you have a valid seal warranty from your window maker. It covers the rest of that warranty’s term (or XPEL’s own term, if shorter), up to $500 per window. Glass breakage from heat stress is covered up to $500 per window too. Most XPEL VISION interior films for homes also carry XPEL’s limited lifetime warranty (commercial and exterior films have shorter terms). On top of that, every Film Bros installation comes with our own 35-year installation warranty against bubbling, fading, yellowing and peeling. Ask us for the full terms.

Want to see what it would cost? Our window film cost guide lists installed prices. Want to see the films first? Try our free Film Lab.

When it’s time to call a pro (or replace the window)

  • Fog between the panes (a failed seal)
  • Soft or rotting frames
  • Cracked glass
  • Sashes that won’t close or lock

Quick questions about the check

Will window film stop drafts? No. Drafts come through gaps around the window; film goes on the glass. Seal the gaps first.

Can film go on double-pane or low-E glass? In most cases, yes. We check the glass type first, which is why Check 3 is useful.

Is freeze spray safe for my windows? Yes, used in short bursts on glass that isn’t hot from the sun. Wear gloves and wipe the glass dry afterwards.

Your printable window checklist

  • ☐ Fans on, windows and doors closed
  • ☐ Paper test around each sash
  • ☐ Looked for fog between panes
  • ☐ Lighter test: know your glass type
  • ☐ Freeze-spray seal test on each double-pane window
  • ☐ Weatherstripping replaced where needed
  • ☐ Gaps caulked inside and out
  • ☐ Locks adjusted, tracks and weep holes cleaned

From the Film Bros team. We install window film on homes and businesses across the GTA. Questions? Call (647) 260-9544 or book a free video call on our homepage.

About the Author

Adam Schlichting, Co-Founder and Lead Installer at Film Bros

Adam Schlichting

Co-Founder & Lead Installer

Certified XPEL installer working on homes, storefronts and offices across Toronto and the GTA.

Want this for your glass?

Book a free video or phone call. One recommendation, one clear price.

Free guides

Questions people ask before they book

Window insulation film: what works in winter?Shrink kits vs window film, why windows feel cold, and what to fix first.Read the guide →Window film or new windows for heat?When film fixes the problem, when new windows win, and the costs.Read the guide →

Film Bros installs across the GTA from our Mississauga shop. See window film in Toronto, window film in Mississauga and security window film in Toronto.

Modern building with large windows

Ready when you are. Let’s plan your glass.

A few taps to your plan. Then a short video or phone call with a film consultant.

Or call (647) 260-9544